22
Connection and Set-Up
The individual items are selected using the
buttons. If you need to access sub-menus, they
can be called up using the
button. The changes to the current settings can be performed using
the
buttons or the number pad.
Position A (satellite selection)
Press the
button to open the sub-menu. You can select a satellite and de
fi
ne the related LNB
con
fi
guration (frequencies) for it. Then press the
(green) button. If you change the default setting (in
this example “ASTRA 19.2°E”), a prompt “Save LNB settings?” will be displayed. Select “Yes” or “No”
using the
buttons and con
fi
rm your selection using the
button.
During the selection of the satellite, ensure you only select a satellite that you
can actually receive using your reception system.
Press the
(green) button to move to the next menu (software update). Continue the
fi
rst installation
with the “Software update” chapter in the
fi
rst installation.
LNB = Low Noise Block converter (feed system)
Summary of Contents for UFS 931sw/HD+
