16
Connection and Set-Up
If your receiver is connected as in the connection example (see
illustration above), no changes are necessary in the rest of the fi rst
installation. If you are not familiar with the details of your reception
system, note the following:
In many cases the satellite reception system is a DiSEqC™1.0 system.
This type of system is preadjusted. Confi rm the rest of the on-screen
displays during the fi rst installation using the
(green) button. You cannot
damage your reception system during this process! If you do not receive
a TV picture at the end of the fi rst installation, contact your specialist dealer.
T
ip!
T
ip!
The following on-screen display appears:
You can set up the antenna (tuner) con
fi
guration for the following types of reception systems:
- DiSEqC™1.0
- Single Cable System
- No LNB power (if your LNB has a dedicated power supply)
- No
DiSEqC™
- Toneburst
Continue as described in the fi rst installation for the type of reception you have selected.
You should perform the tuner confi
guration/make changes yourself only if
you are fully familiar with the particulars of your reception system.
Summary of Contents for UFS 931sw/HD+
