47
Programme not in EPG:
Select any programme on the channel
on which the desired programme is to
be broadcast at a later date, and press
the
(red dot) button. The following
on-screen display appears (example):
As there is no EPG data, you must enter
the data (date, start, end) manually.
Enter the data using the cursor (
) buttons or the number pad. In addition, you can also change
the duration of the recording. The receiver automatically adjusts the end time for the recording to the
duration you have selected. Press the
button to save your settings.
Electronic Programme Guide (EPG)
Use the
buttons to select
the “Once Only” recording mode (see
screenshot on the right).
You can then use the
buttons
to select the individual
fi
elds. Make
the settings using the number pad or
the
buttons.
When all settings have been made, switch to the “Apply” line and press the
button to apply/save
the recording settings. The receiver then automatically displays the timer list in which you can see the
recordings you have planned (see section “Timer List”).
Summary of Contents for UFS 931sw/HD+
