manualshive.com logo in svg

Kathrein UFS 931sw/HD+, Operating Manual

Share
Download
Kathrein UFS 931sw/HD+ Operating Manual Download Page 15

15

Connection and Set-Up

Press the 

 (green) button to move to the next menu.

Press the 

 (green) button to move to the next menu. The following on-screen display appears:

Use the 

 buttons here to select the basic settings for the video output of the receiver to the TV set.

During this process refer to the operating manual for your TV set and take care to select only 
those settings that your TV set can process.

Screen Format

Here you can select the TV picture format. Either

- 4:3 

or

- 16:9/Widescreen 

TV

Picture Scaling

Here you can select the type of screen display, depending on the setting of your TV format:

-  Screen format “4:3”: Pan & Scan or Letterbox

-  Screen format “16:9”: Always 16:9 or Automatic

TV Output Format

Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.

-  FBAS – Colour video baseband signal,

-  RGB – Red/Green/Blue signal or

-  S-Video - Luminance/chrominance

Summary of Contents for UFS 931sw/HD+

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands