18
Connection and Set-Up
The individual items are selected using the
buttons. If you need to access sub-menus, they
can be called up using the
button. The changes to the current settings can be performed using
the
buttons or the number pad.
DiSEqC™ Sequence
Cannot be changed.
Position A and B (satellite selection - max. two)
Position A
Press the
button to open the sub-menu. You can select a satellite and de
fi
ne the related LNB
con
fi
guration (frequencies) for it. Then press the
(green) button. If you change the default setting (in
this example “ASTRA 19.2°E”), a prompt “Save LNB settings?” will be displayed. Select “Yes” or “No”
using the
buttons and con
fi
rm your selection using the
button.
Repeat the process as necessary for the second position (B).
The possible options for a single-cable system with Kathrein components are
summarised at the end of this manual in the “Technical Appendix” section under
“Single-cable systems”.
Depending on the system to which they are connected, a maximum of four or
eight receivers may be connected to a single-cable system (a twin receiver counts
as two receivers).
LNB = Low Noise Block converter (feed system)
Summary of Contents for UFS 931sw/HD+
