66
- 720p (resolution 1280 x 720, full-screen
images)
- 576p (resolution 720 x 576, full-screen
images) or
- 576i (resolution 720 x 576, half-screen
images - PAL)
HDCP Scrambling
Select here whether HDCP (digital copy
protection) is to be constantly set to “Permanent”
or is never to be activated “Never”. In addition you
can select the setting “Automatic” (recommended
setting). To view some channels (HD+) it is
necessary for the setting to be “Permanent”
or “Automatic”.
HDMI Audio
Select here whether the digital audio is to be
transmitted via the HDMI interface.
HDMI-CEC
Using CEC (Consumer Electronics Control)
the receiver can be operated using the remote
control for the TV set. However, this function
cannot be guaranteed, as it is also dependent
on the remote control for the TV set and we
cannot test all sets.
AV Control
Select here whether on switching off the receiver
a signal is to be sent to switch off the TV set.
After calling up the menu you will see the
following on-screen display:
The individual items are selected using
the
buttons. The changes to
the current settings can be made using
the
buttons.
Audio Format
Select here the required audio format. Either:
- Stereo
- Mono (from the left channel)
Main Menu - Settings
Summary of Contents for UFS 931sw/HD+
