manualshive.com logo in svg

Kathrein UFS 931sw/HD+, Operating Manual

Share
Download
Kathrein UFS 931sw/HD+ Operating Manual Download Page 73

73

Main Menu - Service Menu

After calling up the menu you will see the 
following on-screen display:

You cannot change or delete any data 
here.
This menu is merely for viewing the 
reception data for the currently selected 
channel.

After calling up the menu you will see the 
following on-screen display (example):

You cannot change or delete any data 
here.
This menu contains data on smart card 
reader 

fi

 tted and data on the HD+ Card in 

the smart card reader.

After calling up the menu you will see the 
following on-screen display (example):

In the “System Information” menu, the 
receiver displays information regarding 
its hardware and software versions.

On this menu you can change your HD+ PIN. Please note that you are not allowed to use four digits 
that are the same (e. g. 1111). Keep your PIN in a safe place! If you have forgotten your PIN, please 
contact HD+ customer service. The entry is made using the number pad. Follow the on-screen displays/
instructions on the receiver to change your HD+ PIN.

Summary of Contents for UFS 931sw/HD+

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands