60
Main Menu - Search for Channels
After calling up the menu you will see the
following on-screen display:
The
buttons allow you to select
different sets of parameters for the search.
Satellite
Use the
buttons to select the satellite on which the transponder you want to search is located.
Make sure your reception system is aligned to this/these selected satellite(s). If you want search
several transponders on a satellite, you should use an automatic channel search on the transmitting
satellites or set the option “Standard Channel Search” on this menu to “Yes”.
Transponder
Use the
buttons (transponder frequency already saved) or the number pad (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought is
transmitted.
The “Polarisation” and “Symbol Rate” options only need to be specifi ed if the transponder has
yet to be saved.
Symbol Rate
Use the number pad to enter the related symbol rate.
Polarisation
Press the
buttons to select the correct polarisation (horizontal or vertical).
Standard Channel Search
Select using the
buttons whether you also want to undertake a standard channel search. With
the setting “Yes”
fi
rst the transponder selected above is searched and then all transponders on the
satellite selected above. With the setting “No” only the transponder selected above on the selected
satellite is searched.
In this menu you can selectively search a
transponder for the new channels.
Summary of Contents for UFS 931sw/HD+
