manualshive.com logo in svg

Kathrein UFS 931sw/HD+, Operating Manual

Share
Download
Kathrein UFS 931sw/HD+ Operating Manual Download Page 9

9

You must not disconnect the receiver from the mains while it is in operation!
This can lead to a loss of data and corruption of the software.

This unit makes use of legally protected technologies, which are protected by patents in the USA and 
also by other intellectual property rights in other countries. 
KATHREIN-Werke KG has obtained licences from Audio MPEG Inc. and Societa‘ Italiana per lo sviluppo 
dell‘elettronica, S.I.SV.EL, S.P.A to use these technologies. These licences carry certain restrictions, 
which apply also to you as the customer. Accordingly this unit may only be used by the end customer 
for private non-commercial purposes and for the licensed content. It may not be used for commercial 
purposes. The use of products or processes that are sold or used with this unit is not included in this 
statement. The use of reverse engineering is not permitted in respect of the licensed technologies, 
nor is disassembly.

The information in this operating manual was correct at the time of going to print. We reserve the right 
however to make changes at any time and without prior notice. If new software is released for your 
receiver, and this affects the information in the operating manual (e.g. changes to the menus and/
or functions), if we believe it necessary we will make available a new operating manual for download 
under “www.kathrein.de”.

Make a note of the receiver's basic settings (these are set during the 

fi

 rst installation), so you can 

restore them if necessary!

The term DiSEqC™ used in this operating manual is a registered trade mark of the European 
Telecommunication Satellite Organisation (EUTELSAT).

Before you switch disconnect the receiver from the mains, you must switch it to the standby mode by 

pressing the stand-by button (

) on the remote control. In standby mode, any changed or new 

data that is broadcast will be saved by the receiver. As soon as the receiver is in the standby mode, 
it can be disconnected from the mains at any time.

Manufactured under licence from Dolby Laboratories. “Dolby” and the 
double-D symbol are registered trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-De

fi

 nition Multimedia Interface are trademarks 

or registered trademarks of HDMI Licensing LLC.

®

Safety Instructions - Important Notes

Summary of Contents for UFS 931sw/HD+

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands