28
Connection and Set-Up
The Common Interface (CI)
on the UFS 931 is suitable for the use of one CA (Conditional Access)
module. The CI slot is behind the
fl
ap on the right on the front. The CA module
holds the smart
card
(chip contacts pointing downwards and towards socket strip) and is then inserted in the CI
slot
. The smart card should be inserted into the CA module without exerting excessive force.
This also applies to inserting the CA module into the CI slot.
Do not use a excessive force and follow the instructions supplied with the smart card and the CA module.
To remove the module, press the relevant eject button
.
Summary of Contents for UFS 931sw/HD+
