Kathrein UFS 931sw/HD+, Operating Manual

Page: 8 / 96

8
Make sure that the ventilation slots on the unit are not covered in any way.
Otherwise the unit may overheat.
There is a risk of fi re!
The channels available on the satellites and transponders are subject to continual change. If changes
do occur, the new channels have to be set on the receiver because the factory preset programming
corresponds to the status on the date of manufacture. The information for these settings can be found
on the Internet or in relevant magazines.
Your receiver was equipped in the factory with the latest software version at that time. We are, however,
constantly working on adapting the software to the wishes of our customers and to developments in
technology. Further information on this can be found in the chapters “Main Menu - Service Menu”,
“System information - (software update)”.
Please keep the original packaging in case you need to return the product at any time! The receivers
are fragile due to their construction and are only adequately protected by the original packaging. If the
receiver is not shipped correctly the guarantee/warranty on it will be voided.
Any modi fi cations to the receiver software, or the use of applications not provided by Kathrein,
will invalidate the warranty! You will have to bear the costs yourself for shipping and repairing any
receiver that requires attention due to modi
fi cations to the software and use of applications other than
those provided by Kathrein!
Therefore exclusively use only software and applications provided by Kathrein for your receiver. These
are available by downloading from the satellite or from our Internet pages (www.kathrein.de).
Safety Instructions - Important Notes
The power supply unit and the receiver are for indoors use
only! Use the power supply unit supplied with the receiver.
The use of any power supply unit may damage the receiver.
There is a risk of fi re!
The original power supply unit may differ from that illustrated