Kathrein UFS 925 Operating Instructions Manual Download Page 87

Page: 87 / 216

Basic functions

Switching between TV and radio operation

Press the



button to switch between TV and radio operation.

Setting the volume

Adjust the volume using the



buttons.

Channel selection

... direct

The



button allows the channel to be selected from the sorted channel list/favourites list currently

selected. If the channel slot in the channel list is known, the desired channel can also be called up
directly by entering the channel slot, using the number pad on the remote control (e.g. ASTRA HD+

is at channel slot 10 in the currently selected channel list - to call it up, press the



buttons in

successions on the remote control).

... from channel list

Press the



button to open the selection menu. The following on-screen display appears:

Use the



buttons to select “Open channel list” and con

rm by pressing the



button.

The following on-screen display appears:

Summary of Contents for UFS 925

























































































































































































































Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands

Kathrein UFS 925, Operating Instructions Manual

Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands