88
Main menu - Edit TV-Channellist
tvtv on/off
You can use this function only if Premium tvtv EPG data is available for the selected channel.
Use the
buttons to select “tvtv off” or “tvtv on”.
Depending on whether the support by Premium tvtv EPG is activated or deactivated, you can now switch
support on or off by con
fi
rming with the
button.
Due to the large amount of data
being transmitted, the receiver
cannot store all the data for the
channels supported by the EPG. The
receiver con
fi
guration is therefore
factory-set to accept tvtv data for
a limited number of channels only.
You can tell which channels support is
activated (on) for by the blue and red tvtv
logo. Channels for which support is not
activated are recognisable by the logo
being greyed out (see screenshots on
right).
tvtv support on
tvtv support off
If several channels use the same tvtv data, the following warning message is
displayed when you deactivate the function:
“The tvtv data is used for several channels”.
In this case, no tvtv data is stored for the other affected channels.
For example:
If you deactivate support for RTL 2 CH, no additional data is loaded for RTL 2 and
RTL
2
Austria.
De
fi
ne this setting for your desired channels. For better orientation, you can display a channel list
in the category “Complete/Satellite Lists” (green), which includes only those channels supported by
Premium tvtv EPG. The selection of the tvtv list in the category “Satellite Lists” is performed using
the
buttons.
This setting can be changed at any time you like.
