Kathrein UFS 925 Operating Instructions Manual Download Page 158

Page: 158 / 216

During the search you will see the
following on-screen display (example):

The new channels found are identi

ed by

the suf

x “New” (see example screenshot

on the right).

TV channels
found

Radio channels
found

Main menu - Search Channels

After completion of the search, you will
see the following on-screen display
(example):

Press the



button. The newly found

channels are added at the end of the
existing overall list.

You can cancel the search at any

time by pressing the



button.

Press the



button to return to the TV picture. The new channels can now be selected in the channel list.

The following on-screen displays appear
(example):

Summary of Contents for UFS 925

























































































































































































































Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands

Kathrein UFS 925, Operating Instructions Manual

Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands