Kathrein UFS 925 Operating Instructions Manual Download Page 143

Page: 143 / 216

Main menu

Calling up the main menu and introduction

The main menu is called up by pressing the



button. The following on-screen display appears:

The picture for the programme on the currently selected channel appears in the top right-hand corner of
the main menu.

The selected menus, submenus and positions as well as the parameters to be set are each marked in colour.

The submenus are selected using the



buttons and called up using the



button.

Use the



buttons also to select items in the submenus. Settings of the various parameters in

the individual items are de

ned using the



buttons or the number pad.

The main menu and submenus can be exited step-by-step using the



button. Press the



button

to return directly from one of the menus to the TV picture.

Always check the bar at the bottom of
the on-screen display. This provides
information on what to do next.

Tip!

Summary of Contents for UFS 925

























































































































































































































Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands

Kathrein UFS 925, Operating Instructions Manual

Search results

Summary of Contents for UFS 925

Reviews:

Related manuals for UFS 925

Brands by name

Popular brands