19
The following on-screen display appears:
Satellite Con
fi
guration - Tuner 1
De
fi
ne the settings for the
fi
rst satellite for
Tuner 1 here.
LNB Type:
If your reception system does not have a universal LNB, use the
buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal,
- Simple
or
- User-de
fi
ned
Connection and set-up
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.
LNB frequency (MHz):
You only need to specify this data if your
LNB type is not “Universal”. The data
required differs for the settings “Simple”
and “User-de
fi
ned”.
- Selection “Simple” LNB:
Use the number pad to enter the LNB frequency
- Selection
“User-de
fi
ned”:
To enter the required low, high and limit frequencies press
the
button. The entry is made using the number pad
DiSEqC™ input:
- 1 of 4:
For the
fi
rst satellite on the tuner (item A on the system)
- 2 of 4:
For the second satellite on the tuner (item B on the system)
- 3 of 4:
For the third satellite on the tuner (item C on the system)
- 4 of 4:
For the fourth satellite on the tuner (item D on the system)
