17
Signal con
fi
guration for Tuner 2 (only for “Separated” connection type)
Select the signal con
fi
guration for Tuner 2 here. The currently selected setting is shown graphically in the
connection example at the top left of the screen. Either:
Same as Tuner 1:
Both tuners are connected to the same
signal source. See example illustration on
the right.
Different from Tuner 1:
The two tuners are connected to different
signal sources (separate cables from
the LNB). See example illustration on
the right.
The following con
fi
guration options are available for:
Tuner 2 connection type “Loop-through”:
All settings are made on Tuner 1. The second tuner is fed from the
fi
rst tuner.
Tuner 2 connection type “Separated”/Tuner 2 Signal Con
fi
guration “Same as Tuner 1”:
All settings are made on Tuner 1. The settings for the second tuner are automatically taken from the
fi
rst tuner.
Tuner 2 connection type “Separated”/Tuner 2 Signal Con
fi
guration “Different from Tuner 1”:
All settings must be made separately for the two tuners.
Use the
buttons to set the parameters “Tuner 2 Connection type” and “Tuner 2 Signal Con
fi
guration”
appropriate to the setting for your reception system.
Continue as described in the
fi
rst installation for the type of reception you have selected.
Connection and set-up
