101
Software update (by satellite)
Main menu - Service menu
After calling up the menu you will
fi
rst see
the following on-screen display:
All available modules/components
for your receiver will be loaded and
then displayed.
The loading process may take
up to 60 minutes
The following on-screen display then
appears:
Use the
buttons to select the
parameters to be updated during the
update procedure.
Show Infotext
Press the
button to display the info text for the available downloads. This indicates the main features
of the new operating software, on the basis of which you can decide whether you want to install the new
software on your receiver.
Update Software
Select “Yes” here if you want to install new software; select “No” if you are satis
fi
ed with your old software
version and the changes in the new software are not relevant to you.
Update channellist
Select “Yes” here if you want to install the new channel list, or “No” if you want to retain your old channel
list. Prior to doing this, you can also save your old channel list via “Software update by USB”, “Save
Channel list to USB” however, so that if you do not like the new channel list you can revert back to
the old one.
If a new channel list is loaded, this will be automatically recovered after each factory reset (Restore factory
default settings) (see “Service menu”, “Restore factory default settings”, “Reset channel list”).
x.xx