132
Main menu - Interfaces
HDD Management
After calling up the menu you will see the
following on-screen display (example):
Use the
buttons to select the desired action and con
fi
rm using the
button.
The following on-screen display appears (example: formatting the recording archive):
During formatting, all
data will be deleted
from the relevant
directory. Deleted data
cannot be restored - it
is irrevocably deleted!
Press the
button to con
fi
rm, or the
button to cancel.
Here you can choose between the settings “On” and “Off”. If it is set to “On”, programmes recorded with
encryption will be automatically decrypted by the receiver in standby mode. For this, it is essential that
the CI module with a Smartcard is located in the common interface of the receiver. Manual selection
for decryption in standby via the recording archive (My recordings) is then not required.
Automatic Decryption in Standby
If your CI module is capable of decrypting multiple channels, you can press the
buttons
to select whether the module should only ever decrypt one channel (Off) or multiple channels
simultaneously (On). This function is optimised for “AlphaCrypt” modules and may lead to malfunctions
with other modules.
If you select “Off”, then you cannot view another encrypted channel through the same CI module and the
currently selected transponder at the same time as making an unencrypted recording of an encrypted
channel.
If you select “On”, you can view another encrypted channel through the same CI module and the
currently selected transponder at the same time as recording an encrypted channel. The number of
other encrypted channels that you can view depends on the CI module you are using.
Multidecryption
