30
Test Transponder:
Select the “Test Transponder”
fi
eld. Here you can select a transponder for checking the signal strength
bar and signal quality bar to see whether your settings are correct.
When you have completed all settings for this satellite, press the
(green) button. The receiver will
now save these values for this satellite and skip automatically to the setting for the next satellite.
If you have selected more than one satellite for Tuner 1, the receiver will automatically skip to the
settings for the second satellite. Now de
fi
ne the settings for the second satellite, followed by the other
selected satellites, in the same way as described for the
fi
rst satellite.
Once all settings for all the satellites that you selected have been completed, the receiver will
automatically skip to the settings for the second tuner (assuming that for the second tuner you selected
the connection type “Separated” and set the signal con
fi
guration to “Different from Tuner 1”). If this is the
case, now de
fi
ne the settings for the second tuner in the same way as you did for the
fi
rst tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver
will automatically display the screen for the channel search. Continue the
fi
rst installation with the
“Channel Search” section.
Connection and set-up
