35
Refer to the documentation supplied with your system for the settings for the
SCRs, frequencies and any PIN assigned to the tuner. Here, you will
fi
nd a printed
list showing the assignment between the various SCRs and the respective
transmission frequencies. You may not be able to freely select the PIN for
protection of individual frequencies; this also may be listed in the documentation
for the OneCable components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.
Do not assign the same frequencies/channels to Tuner 1 and Tuner 2.
The following on-screen display appears:
Secure channel with PIN:
If your OneCable system allows the transmission frequency to be protected by entering a PIN, this
can be done in this menu. No other receiver can then use this transmission frequency unless the PIN
is entered.
Select the setting “On”. You may then use the number pad to enter a PIN code (0-255) in the line
underneath “Tuner 1 PIN code”.
Transmission channel for Tuner 1:
Select a free available transmission
channel (SCR 0 - SCR 7).
Transmission frequency for Tuner 1:
Select here one of the free available
transmission frequencies.
See example on the right (EXR 1581)
assignment of a transmission channel to
a transmission frequency.
De
fi
ne the settings for the second tuner in the same way as for the
fi
rst tuner.
When you have completed all settings, press the
(green) button.
Connection and set-up
