93
Main menu - Search Channels
Automatic Channel Search
After calling up the menu, you will see
the following on-screen display:
The
buttons allow you to select
the parameters you want to change for
the search.
Satellite
Now use the
buttons to choose between the individual satellites you have set up, or select
the setting “All”. If “All” is selected, all the individual satellites you have set up will be searched for
new channels. Make sure your reception system is aligned to this/these satellite(s).
Channel Search Mode
Use the
buttons to select the type of channels you want to search for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “scrambled only”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CI (Common Interface) module and a
valid Smartcard together with a valid subscription to the relevant Pay TV provider.
NIT search (network search)
Use the
buttons (On/Off) to select whether a network search should be performed. If you set
the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new and as yet unsaved channels. If you set the network search to “On”,
the transponder network enables additional transponders that have not yet been stored to be located.
These are then stored and searched for new channels in the same way as the existing transponders.
Once you have de
fi
ned all the settings, use the
buttons to switch to the “Start Search” selection
fi
eld and con
fi
rm the start of the search using the
button.
