46
Connection and set-up
This menu can be found in the receiver
under: Main menu - Interface set-up -
Ethernet settings. After calling up the
menu you will see the following on-screen
display (example):
The Ethernet interface used in the
receiver is a 10/100 base T Ethernet
interface.
If you want to connect your receiver to a DHCP server/router, use the
buttons to select the
“On” setting. If you wish to connect your receiver to a PC or laptop, the DHCP setting must be “Off”.
DHCP “On”
(DHCP server/router)
DHCP “Off”
(Hub/switch/direct
connection to PC or laptop)
The individual items are selected using the
buttons. Changes to the current settings can be
made using the
buttons or the number pad.
An Internet connection is required to use HbbTV and HD+ InterAktiv!
These settings should not be de
fi
ned unless the receiver is linked into a network
(e.g. for Internet access) or is linked to a PC/laptop using a cross-over network cable.
Refer to our network function connection examples at the end of this manual and
the instructions on this subject available on the Internet at “www.kathrein.de”
“Service”
→
“Software and downloading”
→
“Receiver”
→
“UFS 925”.
To connect the receiver to the network via the PC/laptop, you must have unrestricted rights
(administrator rights) for your PC/laptop and on your network.
If you have problems connecting the receiver to your network directly or via your PC/laptop,
refer to your PC or network specialist.
Network/Internet access
