Kathrein UFS 924, Operating Instructions Manual

Page: 40 / 64

40
If you do not wish to perform a channel search, press the

(green) button and continue with the section
“Date and time”.
If you wish to perform a channel search, use the

buttons to select “Yes”.
The following on-screen display appears:
Country Select
Using the

buttons, select whether
the channels found after the search are to
be sorted using a factory channel list for
the selected country. Currently this feature
is only available for Germany , Austria and
Switzerland.
Channel search
Connection and setup
Satellite
Now use the

buttons to choose between the individual satellites you have set up, or select the
setting “All Satellites”. If “All Satellites” is selected, all the individual satellites you have set up will be
searched for new channels. Make sure your reception system is aligned to this/these satellite(s).
Channel Search Mode
Use the

buttons to select the type of channels you want to search for. You have three options:
- “free & scrambled” All channels are searched for
- “only free” Only free-to-air channels are searched for
- “only scrambled” Only encrypted channels are searched for