39
Connection and setup
LNB Frequencies (MHz):
Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the
button to save the
new values.
Test-Transponder:
Select the “Test-Transponder” f eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
When you have completed all settings for the selected satellites, press the
button.
If you have selected two satellites, conf gure the settings as just described for the f rst satellite for the second
satellite.
When you have completed all settings, press the
(green) button.
When you have completed all of the settings, you will automatically see the on-screen display for the
channel search. Continue the f rst installation with the “Channel Search” section.
Summary of Contents for UFS 924
