Kathrein UFS 924, Operating Instructions Manual

Page: 32 / 64

32
Connection and setup
Select the “Yes” option using the

buttons on the “OneCable System
Used” line. Now go to the selection
f eld “Tuner 1 & 2: OneCable System”.
Press the

(green) button.
In the reception system f eld select the OneCable system in use:
- EXR .../EXU ... For all Kathrein OneCable matrices
- UAS 481 For the Kathrein OneCable LNB UAS 481
- User-def ned For all OneCable systems not covered by the above
OneCable system
Refer to the documen-
tation for your
reception system or
seek assistance from a
specialist engineer.
Refer to the documentation supplied with your system for the settings for the
SCRs, frequencies and any PIN assigned to the tuner. Here, you will fi nd a printed
list showing the assignment between the various SCRs and the respective
transmission frequencies. You may not be able to freely select the PIN for protection
of individual frequencies; this also may be listed in the documentation for the
one cable components.
Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.
Do not assign the same frequencies/channels to Tuner 1 and Tuner 2.
Continue as described in the fi rst installation for the type of single-cable reception you selected.