Kathrein UFS 924, Operating Instructions Manual

Page: 25 / 64

25
Connection and setup
On the “Satellite” line select the satellite whose settings you wish to edit.
Satellite:
Select the desired satellite using the

buttons. Alternatively you can press the

button to view
a list of all satellites which you have previously selected, then select the required satellites from this list.
LNB Type:
If your reception system does not have a universal LNB, use the

buttons to select the
LNB types that are used in your reception system. You can choose from the following LNB types:
- Universal
- Simple or
- User-def ned
If you do not use a Universal LNB, press the

button. You can now de f ne the settings for your
LNB type (simple or user-def ned).
LNB Frequencies (MHz):
Enter the LNB frequencies (Low/High/Limit) using the number pad. Now use the

button to save the
new values.
Test-Transponder:
Select the “T est-Transponder” f eld. Here you can select a transponder for checking
whether your settings are correct using the signal strength bar and signal quality bar.
Stop on Signal:
Select the selection f eld “Stop on Signal”. Here, you can select whether the turntable antenna should
stop its rotary movement immediately on reception of a signal from the desired satellite. You can choose
between “On” and “Off”.
Move Antenna:
Select the “Move Antenna” f eld. Here you can control the movements of the motorised antenna, using
the following buttons:

Start slow rotation to West

Rotate to the West step by step

Stop the current movement
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.