Kathrein UFS 924, Operating Instructions Manual

Page: 14 / 64

14
(standard TV), the original format is to be
transmitted to the TV set, select the “On” setting.
If the setting is “Of f”, the programme may be
automatically scaled up to the HDTV format 720p
by the receiver.
HDCP for free channels
Select here whether HDCP (digital copy protection)
is to be constantly set to “On” with free channels or
is not to be activated, “Off”.
TV control box via HDMI (CEC)
If you select “Of f”, the TV set must be switched
on or of f separately. If you select “On”, the TV
set will be switched on automatically as the
receiver starts up (but only if the TV set was in
stand-by mode). If the receiver is switched off into
standby mode, the TV set will also be switched to
standby mode.
Automatically switching the TV set on/off by the
receiver is available only if the TV set supports
this function!
Show 4:3 Event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set. Either
- Normal (Pillarbox)
- Stretched (full screen) or
- Zoom in (Pan & Scan)
Audio Format via HDMI
Here you can select the type of audio signal that
is transmitted by the HDMI interface. Select the
signal that your TV set can process:
- PCM (Stereo) or
- S/PDIF format (multichannel)
Auto Dolby Digital Output:
Here you can select whether the receiver should
automatically select the Dolby Digital soundtrack
(if this is transmitted).
TV-SCART-Output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set can
process.
- CVBS – composite video (Composite V ideo,
Blanking, and Sync) signal or
- RGB – red/green/blue signal or
- Y/C – S-Video signal (luminance/chrominance)
TV-SCART-Output
Select the type of video signal at the VCR Scart
socket here. Select the signal that your external
recorder can process.
- CVBS – composite video (Composite V ideo,
Blanking, and Sync) signal or
- Y/C – S-Video signal (luminance/chrominance)
Connection and setup