24
Select Satellites - Tuner 1
Go to the “Select Satellite” line. Press the
button.
The following on-screen display appears (example):
Connection and setup
If you subsequently want to delete the set borders, switch to the “Reset border positions” f eld and press
the
button to con f rm deletion of the borders. You can now set new values for the limits. Once you
have set all the borders, press the
button.
Here, select up to 64 satellites to be
included in the signal on Tuner 1. Select
the satellite you want and con f rm your
selection with the
button. The selected
satellites will be identif ed with a tick.
When you have selected the desired satellites, press the
button.
Confi gure Satellites
Go to the “Conf gure Satellites” line. Press the
button.
The following on-screen display appears (example):
Summary of Contents for UFS 924
