18
You now see the following on-screen
display:
Tuner Confi guration (satellite selection)
- Tuner 1
Select the number of satellites present in
the signal at the tuner 1 (four max.).
Go to the “Satellite 1: .....” line.
Press the
button.
Press the
(green) button.
DiSEqC™1.0
Connection and setup
Satellite:
Select the desired satellite using the
buttons. Alternatively you can press the
button to view
a list of all stored satellites then select the required satellites from this list.
LNB Type:
If your reception system does not have a universal LNB, use the
buttons to select the
LNB types that are used in your reception system. You can choose from the following LNB types:
The following on-screen display appears
(example):
Confi guration Satellite 1
Def ne the settings for the f rst satellite for
Tuner 1 here.
Summary of Contents for UFS 924
