45
Connection and setup
Use the
buttons to select the “Get IP
address” f eld and con f rm by pressing the
button.
Your DHCP server/router now indicates the IP
address to the receiver . As soon as the receiver
has been assigned its IP address by the DHCP
server (IP address is displayed), switch to the
“Save” f eld and press the
button to conf rm.
Def ne the settings for your network as required.
When you have completed all the settings, switch
back to the “Save” f eld and press the
button
to conf rm.
Confi guration example:
Receiver:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
PC/Laptop:
IP address: 192.168.1.4
Subnet mask: 255.255.255.0
If no connection can be
established between the receiver
and DHCP server/router with
the “DHCP On” setting, switch
the setting to “DHCP Off” and defi ne
the setting as described for DHCP “Off”.
Summary of Contents for UFS 924
