4-23
EXTERNAL REAR VIEW MIRRORS
It is recommended to check the installation of ex-
ternal mirrors on the vehicle before each drive.
Position of the right and the left external rear view
mirrors is regulated by electric drivers.
POSITION REGULATION OF EXTERNAL REAR VIEW
MIRRORS
1. Turn the ignition key to «ON» position (motion
position).
2. Choose by the shifter a proper rear view mirror
(see Fig.
Shifter of external rear view mirror position
):
for l.h. mirror - position «L», for r.h. mirror - position
«R».
3. Press the shifter forward or backward, to the
right or to the left until the time when the mirror occu-
pies necessary position.
One must bear in mind: the reflection in external
mirrors is always undersized, that is why the objects
seem more away than it is in reality.
MIRROR HEATING
In wet and cold weather to prevent misting and
ice coating of external rear view mirrors use mirror heat-
ing system.
The shifter of mirror heat engagement/ disen-
gagement is located in the switch block on driver's door
(see Fig.
Mirror heat shifter
).
To engage the
mirror heating press the shifter 1.
Pilot LED 3 lights up.
To disengage the
mirror heating press the shifter
2. Pilot LED dies out.
Shifter of external rear view
mirror position
Mirror heat shifter
1 – Shifter of mirror heat engagement;
1 – Shifter of mirror heat disengagement;
3 - pilot LED
1
2
3
Summary of Contents for 5490
