Kalmar DRF420-60S5, Maintenance Manual

Page: 35 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
C Preventive maintenance – Preventive maintenance 3
mm mm mm mm
Preventive maintenance
page –
Preventive maintenance, general
It’s very important that preventive maintenance is performed ac-
cording to recommended intervals.
Preventive maintenance should be performed by Kalmar Industries,
or by a service organization authorized by Kalmar Industries.
page –
Preventive maintenance, work
instructions
1 For new machine it is very important to check-tighten the
wheel nuts during the first work week, until they are securely
tightened. This shall be performed at an interval of 4–5 operat-
ing hours (up to approx. 40–50 operating hours).
2 For new machine, checking actions shall be performed after 50
hours of operation, see 50h-check page 5 .
Note completed 50h check in the service log, see Check and
service log page 4 .
3 Service at regular intervals shall be performed according to
service schedule, see Service schedule page 7 . The service
schedule shall be followed to ensure the machine’s high oper-
ating reliability.
Note completed service in the service log, see Check and serv-
ice log page 4 .
C A U T I O N
The warranty is not valid if service intervals are not
followed.
Preventive maintenance shall be performed accord-
ing to the prescribed intervals and extent.
Use spare parts, oils and fluids approved by Kalmar
Industries.
https://www.forkliftpdfmanuals.com/