Kalmar DRF420-60S5 Maintenance Manual Download Page 203

Page: 203 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

7 Load handling – 7.9.2.14 Lifting shoe

6 Clean the area around the grease cup.

7 Grease the bearings for the plate for clamping position with uni-

versal grease "EP2"

8 Repeat steps 2–7 on all lift legs.

page

–

Lift shoe, checking for cracks

Area for checking for cracks on lift shoe.

NOTE

Crack checks shall take place every other year or every 5000
operating hours.

1 Remove the lift shoes from the lift legs.

NOTE

The lift shoes are heavy. Take care when removing.

2 Test for cracks within the marked area on the lift shoes without

reworking or damaging the part.

3 Fit the lift shoes.

002314

D A N GE R

Material fatigue, reduced strength.

Fatal danger!

Change lift shoes that show signs of cracks, exter-
nal damage or lift shoes with more than 10 000 op-
erating hours.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRF420-60S5

Reviews:

Brands by name

Popular brands

Kalmar DRF420-60S5, Maintenance Manual

Search results

Summary of Contents for DRF420-60S5

Reviews:

Brands by name

Popular brands