Kalmar DRF420-60S5, Maintenance Manual

Page: 79 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
1 Engine – 1.8 Lubrication 21
Do not tighten the oil plug with higher tightening torque,
the threads will be damaged.
10 Fill with engine oil. For volume and grade, see section F Tech-
nical data .
11 Start the engine, let it idle and check that the drain plug and fil-
ters do not leak.
12 Turn off the engine and check the oil level, see Oil level, check-
ing page 23 . Top up if needed.
13 Remove the collection container, handle the engine oil and fil-
ters as environmentally hazardous waste.
page –
Oil and oil filter, change (engine alternative
Cummins)
1 Run the engine until warm.
2 Machine in service position, see section B Safety .
3 Remove the protective plates over the oil filling point for the en-
gine and transmission.
4 Place a receptacle underneath the engine.
5 Remove the drain plug on the engine and drain the engine of oil.
6 Place a receptacle under the oil filters.
7 Clean the area around the oil filters.
C A U T I O N
Avoid skin contact with the oil, use protective
gloves.
Hot oil may cause burns, rashes and irritation!
https://www.forkliftpdfmanuals.com/