Kalmar DRF420-60S5, Maintenance Manual

Page: 120 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
16 4 Brakes – 4.8.12 Brake oil filter
Brake oil filter is located under the lift cylinder beam
in front of the transmission.
4 Place a receptacle under the oil filter to collect any oil spills.
5 Clean the outside of the brake oil filter.
6 Remove the drain plug on the underside of the filter.
Let the oil drain. Wait a while since the oil drains slowly.
7 Remove the filter holder.
8 Remove the filter cartridge.
NOTE
Note the position of the O-rings.
9 Clean the filter holder.
10 Fit the O-rings on the filter cartridge and filter holder. Lubricate
the O-rings with brake oil.
11 Fit the small O-ring to the filter cartridge.
12 Fit the new filter insert to the filter bracket.
13 Fit the filter holder and the drain plug.
14 Close the drain valve on the accumulator charging valve.
15 Turn on the main electrical power and start the engine.
16 Check that the filter holder does not leak.
17 Remove the receptacle. Handle the filter and oil as environmen-
tally hazardous waste.
18 Fit the cover plates over the engine.
000018
https://www.forkliftpdfmanuals.com/