manualshive.com logo in svg

Kalmar DRF420-60S5, Maintenance Manual

Share
Download
Kalmar DRF420-60S5 Maintenance Manual Download Page 70

UDRF01.04GB 

Maintenance manual DRF 400–450

12

1 Engine – 1.2.4 Fuel filter

1.2.4

Fuel filter

page

 

–

Fuel filter, changing (Volvo engine)

 

NOTE

Avoid skin contact with fuel, use gloves. Fuel on hands may 
cause rashes and irritation.

NOTE

Do not fill the new fuel filter with fuel before installing. There is 
a risk that impurities may enter the fuel system, resulting in 
malfunctions or damage.

1  Machine in service position, see section 

B Safety

.

2  Place a receptacle under the fuel filter.

3  Clean the area around the fuel filter.

4  Remove the fuel filter with filter tool.

5  Lubricate the O-ring on the new fuel filter with engine oil. 

6  Fit the new fuel filter.

Tighten to contact and then another half to three-quarter turn. 

7  Bleed the fuel system, see 

Fuel system, bleeding (engine alter-

native Volvo) page 9

.

8  Turn on the main electrical power and start the engine. Check 

that the fuel filter seals tight.

9  Turn off the engine and remove the receptacle. Handle the fuel 

as environmentally hazardous and inflammable waste.

D A N GE R

Pay attention to the fire hazard when working on 
the fuel system. 

Avoid changing the fuel filter when the engine is 
hot. 

Fuel may spill on hot surfaces and may ignite.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands