Kalmar DRF420-60S5 Maintenance Manual Download

Page: 67 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

1 Engine – 1.2 Fuel system

1.2

Fuel system

page

–

Fuel system, description

1. Filling point, fuel
2. Fuel tank
3. Sensor, fuel level (behind air filter)

For position of components, see

Engine alternative Volvo, compo-

nent position page 4

Engine alternative Cummins, component po-

sition page 7

page

–

Fuel system, bleeding (engine alternative
Volvo)

1 Clean the area around the bleeder nipples on the fuel filter's

bracket and cylinder head.

2 Place a receptacle under the fuel filter.

3 Connect a transparent plastic hose to the bleeder nipple on the

filter bracket. Place the other end of the hose in the collection
container.

4 Open the bleeder nipple on the filter bracket.

5 Pump up fuel with the hand pump until clean fuel free of air

bubbles flows out of the hose.

NOTE

If only the fuel filter has been changed, no further bleeding
is required.

6 Transfer the hose to bleeder nipple on the cylinder head, bleed

in the same way as by the fuel filter.

002289

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands

Kalmar DRF420-60S5, Maintenance Manual

Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands