manualshive.com logo in svg

Kalmar DRF420-60S5, Maintenance Manual

Share
Download
Kalmar DRF420-60S5 Maintenance Manual Download Page 119

UDRF01.04GB

Maintenance manual DRF 400–450

4 Brakes – 4.8.11 Breather filter

15

4.8.11

Breather filter

page

 

–

Breather filter, changing

 

1. Filling point, oil for brake system
2. Breather filter, brake oil tank

1  Clean the area around the brake tank's breather filter.

2  Remove cover from the filter holder. 

Remove the screw in the middle and lift away the cover. 

3  Remove the old filter cartridge.

4  Clean the filter holder.

NOTE

Work carefully so that impurities do not enter the tank.

5  Fit a new filter cartridge.

6  Refit the cover to the filter holder. 

4.8.12

Brake oil filter

page

 

–

Brake oil filter, changing

 

NOTE

The filter protects the brake system from impurities. It is very 
important that new impurities do not enter the brake system 
when changing the filter. 

NOTE

The filter holder is heavy, loosen it carefully.

1  Machine in service position, see section

 B Safety

.

2  Depressurize the hydraulic and brake systems, see section

 B 

Safety

.

NOTE

Leave the valve open when changing.

3  Remove the cover plates from over the engine compartment.

W A R N I N G

Hot, pressurized oil.

Personal injury, burn injury, rash or irritation

Always depressurize the hydraulic systems before 
starting to work in the hydraulic systems. Avoid 
skin contact with the oil, use protective gloves.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands