Kalmar DRF420-60S5 Page 31 Maintenance Manual Download

Page: 31 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

B Safety – Safety instructions

page

–

Tyre system

Risks

Dismantling wheels: Tyres, rims or lock rings can be thrown.

Inflating tyres: Tyres, rims and lock rings can be thrown.

Safety actions

•

Deflate the tyre before starting to work on the wheel.

•

Check that tyres, rims and lock rings aren’t damaged. Never re-
pair damaged rims or lock rings.

•

Use protective screen and safety glasses.

D A N GE R

Tyres should be regarded as pressurized containers.
They constitute fatal danger if handled incorrectly.

Parts can be thrown with explosive force and may
cause severe injuries.

Never repair damaged tyres, rims or lock rings. Tyre
repairs should only be performed by authorized per-
sonnel.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands

Kalmar DRF420-60S5, Maintenance Manual

Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands