Kalmar DRF420-60S5, Maintenance Manual

Page: 325 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
D Error codes – 1 Engine 7
97/3 176
DTC -
Water in
fuel or
clogged
fuel line
(low fuel
pressure). No limita-
tion. Drain water trap.
Clean metal filter in feed
line's hose connection on
the engine.
Check fuel filter and fuel
pre-filter.
- - 1.2.3 Fuel pre-
filter
100/1 180
DTC 6.6
Low en-
gine oil
pressure. Engine is
shut off. Check the oil level.
Check that filters are not
clogged.
Check the system pressure
valves and the safety valve
in the lubrication system.
Check the sensor function.
- ENGINE,
menu 6 1.8 Lubrica-
tion system
100/3 181
DTC 3.1
Sensor oil
pressure
cable
short-
circuited
to voltage. No limita-
tion. Check cabling between
control unit and compo-
nent.
Check that sensor is in-
stalled correctly.
D794/
Black:14 ENGINE,
menu 6 1.8.3 Sensor
oil pressure
100/4 182
DTC 3.1
Sensor oil
pressure,
open cir-
cuit or
short-
circuited
to ground. No limita-
tion. Check cabling between
control unit and compo-
nent.
Check that sensor is in-
stalled correctly.
Check connection 14 in the
black connector on the en-
gine's control unit.
D794/
Black:14 ENGINE,
menu 6 1.8.3 Sensor
oil pressure
102/0 57 DTC
-
High boost
pressure. No limita-
tion. Check turbocharger.
Check sensor boost pres-
sure.
Check fuel quality and unit
injectors.
- ENGINE,
menu 6 1.6 Air inlet
and exhaust
system
102/1 58 DTC
-
Low boost
pressure. Reduced en-
gine power. Check air filter.
Check turbocharger
Check sensor boost pres-
sure.
Check fuel feed pressure.
- ENGINE,
menu 6 1.6 Air inlet
and exhaust
system
Descrip-
tion Limitation Action Con-
nec-
tion
and
com-
ponent Diag-
nostic
menu Function
group
Code Volvo
code
https://www.forkliftpdfmanuals.com/