Kalmar DRF420-60S5 Maintenance Manual Download

Page: 202 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

7 Load handling – 7.9.2.14 Lifting shoe

7.9.2.14

Lifting shoe

page

–

Lift shoe, checking

1. Indicator pin, alignment
2. Indicator pin, clamping position
3. Lift shoe

1 Lower all lift legs.

2 Check that the plate for clamping position and pin for alignment

move freely and spring back to the basic position.

3 Press in the alignment pin so that the head is flush with the

spreader beam's underside and check that the indicator light is
activated.

NOTE

The alignment pin should move easily and spring back
completely.

4 Press in the plate for clamping position and check that the plate

moves easily and springs back completely, as well as that the
indicator light for clamping position is activated.

NOTE

The plates for both lift legs (right and left) must be pressed
in to achieve activation of the indicator light.

Wear limits, lift shoe.

5 Check that the wear of the lift shoe is within the specified limits

according to the illustration. Also check that the lift shoe does
not show signs of cracking or other external wear. Change lift
shoe if needed

001857

002312

Min.

8 mm

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands

Kalmar DRF420-60S5, Maintenance Manual

Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands