manualshive.com logo in svg

Kalmar DRF420-60S5, Maintenance Manual

The maintenance manual for the reliable and efficient Kalmar DRF420-60S5 is now available for free download on manualshive.com. This comprehensive manual provides step-by-step instructions and essential information to ensure optimal performance and longevity of your machine. Get the manual today and enhance your operational efficiency.

Share
Download
background image

UDRF01.04GB

Maintenance manual DRF 400–450

10 Common hydraulics – 10.6.8 Hydraulic oil

17

15  Remove the receptacle, handle filters and oil as environmental-

ly hazardous waste.

16  Check the oil level in the hydraulic oil tank. The oil level should 

be at the top of the level glass. Top up if needed.

NOTE

The hydraulic oil level is checked with the boom complete-
ly lowered and retracted.

10.6.8

Hydraulic oil

page

 

–

Hydraulic oil, changing

 

1. Cover plate for oil filter
2. Filler plug for hydraulic oil
3. Level glass, hydraulic oil
4. Filler plug for hydraulic oil
5. Breather filter, hydraulic oil tank

1  Machine in service position, see section

 B Safety

.

2  Place a receptacle (700 l) under the hydraulic oil tank's drain 

plug.

3  Remove the plug and lead the oil into the receptacle.

4  Fit the drain plug when the oil has drained.

NOTE

Make sure that the seal washer is installed as well.

5  Handle the spent oil as environmentally hazardous waste.

6  If the hydraulic oil filters are to be changed, replace them be-

fore the tank is filled with oil, see 

Hydraulic oil filter, changing 

page 14

.

7  Fill oil through the filling holes on the filters' cover plates. 

This means the oil that is filled is filtered, and protects the hy-
draulic system from impurities.

8  Check the oil level in the hydraulic oil tank. The oil level should 

be visible in the level glass. Top up if needed.

NOTE

The hydraulic oil level is checked with the boom complete-
ly lowered and retracted.

W A R N I N G

Hot and pressurized oil.

Personal injury, burn injury, rash or irritation.

Always depressurize the hydraulic systems before 
starting to work in the hydraulic systems. Avoid 
skin contact with the oil, use protective gloves.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DRF420-60S5

Xtreme Manufacturing XRM945 Operation & Safety Manual preview
XRM945
Brand: Xtreme Manufacturing Pages: 76
KAUP 2T458P Operating Manual preview
2T458P
Brand: KAUP Pages: 27
Land Pride PFL 2042 Operator'S Manual preview
PFL 2042
Brand: Land Pride Pages: 28
Vestil FPU-TN Series Instruction Manual preview
FPU-TN Series
Brand: Vestil Pages: 4
Presto Power Stak PPS2200-62NFO-27 Installation, Operation And Service Manual preview
Power Stak PPS2200-62NFO-27
Brand: Presto Pages: 32

Brands by name

Popular brands

Load more brands