Kalmar DRF420-60S5 Maintenance Manual Download

Page: 193 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

7 Load handling – 7.9.1.7 Twistlocks

page

–

Twistlock, checking for cracks

NOTE

Crack checks shall take place every other year or every 5000
operating hours.

1 Remove the lift pins from the attachment.

NOTE

Twistlocks are heavy. Take care when removing.

Area for checking for cracks on lift shoe.

2 Test for cracks within the marked area on the pins without re-

working or damaging the part.

3 If the lift pins show signs of cracking, they shall be replaced

with new ones.

4 Fit approved twistlocks.

NOTE

Use new attaching nut and washers.

D A N GE R

Material fatigue, reduced strength.

Fatal danger!

Change twistlocks that shows signs of cracks or
other external damage, or twistlocks with more
than 10 000 operating hours.

002313

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRF420-60S5

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands

Kalmar DRF420-60S5, Maintenance Manual

Search results

Summary of Contents for DRF420-60S5

Reviews:

Related manuals for DRF420-60S5

Brands by name

Popular brands