KAESER ESD 352 SFC, Technical Documentation Manual

Page: 179 / 413

4 Logging on with Equipment Card
Proceed as follows:
■ Take the plastic sleeve from the control cabinet.
■ Remove one Equipment Card.
■ Note the number on the reverse side of the Equipment Card.
■ Safely store the number.
■ Log on with Equipment Card
➤ Proceed in the prescribed sequence of actions.
Remove the Equipment Card from the control cabinet.
The supplied Equipment Cards are stored in a plastic sleeve.
This plastic sleeve is attached to the rear of the controller in the control cabinet.
The number shown on the rear of the Equipment Card is also the user name.
The user name is required for a manual log on without Equipment Card.
Fig. 1 KAESER Equipment Card
1
KAESER Equipment Card
2
Number of the KAESER Equipment Card
1. Open the control cabinet.
2. Remove the plastic sleeve from the rear of the controller.
3. Remove one Equipment Card from the plastic sleeve.
4. Note the number shown on the backside of the Equipment Card.
5. Store this information at a suitable location.
Log on with Equipment Card
Use a supplied KAESER Equipment Card to log on at the controller.
Two of them have been provided with the machine.
4 Logging on with Equipment Card
4
Quick user guide Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
9_9450 03 USE