manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 4 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 4

4

Intr
oduction

Verifying the Accessories

If any item is missing or damaged, please contact your place of purchase or customer support.

Camera

Camera.

Pantilter

Attach it to the camera before use. Can be panned (right/left) or 
tilted (up/down) remotely from a computer or mobile terminal.  ( 

➭

 

page 25)

AC Adapter UIA324-12

Connect it to the camera or pantilter when using with AC power.  ( 

➭

 page 12)

* Attach an AC cord and a conversion cable.

AC cord

Use it when connecting the AC adapter.

Conversion cable

Use it when connecting the AC adapter.

Rear cover

Attach this cover to rear of the camera when carrying the unit, etc.

LAN cable (cross)

Use it to connect the unit, computer, and access point (router).
Also used when you configure the initial settings.

Software CD-ROM

Use it to install the supplied software "JVC CAM Control". ( 

➭

 page 

39)

Basic User Guide

Describes the basic operations, "Safety Precautions" and 
"Cautions".
Please read the instructions carefully before use and operate 
correctly as instructed.

•  Purchase an SD card separately. 
•  When using the AC adapter overseas, use a commercially available conversion plug appropriate for the country 

or region.

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments