manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 15 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 15

15

Preparation

Configuring the Camera Settings

This section describes the settings necessary to use the unit. For the "MANAGE" settings not mentioned on these 
pages, refer to page 46 .

Adjusting the clock

Adjust the internal clock. The time can be displayed 
when videos are transmitted.

1 

Select "COMMON SETTINGS" in "MANAGE".
If the sub settings are not displayed, click "+" on the 
left of "MANAGE".

2 

Click the "SET" button on the right of "CLOCK 
ADJUST".

3 

Enter the date and time.

4 

Click the "SET" button.

The time is set, and the "COMMON SETTINGS" 
screen reappears.

•  If an incorrect value is entered, "INVALID DATA 

INPUT" appears. Check the entered value.

•  If communication to the camera fails, 

"COMMUNICATION ERROR OCCURRED" 
appears. Check the connection.

•  If "PROCESS FAILED" is displayed, check the 

camera and computer.

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments