manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 10 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 10

10

Preparation

Flow of Connection/Setup

Connect the unit to the computer, and configure the appropriate settings on a browser.

Starting shooting

1 

Connect the camera to your computer via the supplied LAN cable.  ( 

➭

 page 11)

To set up the camera, first connect it to your computer.

2 

Connect the AC adapter.   ( 

➭

 page 12)

Connect the supplied AC adapter when the connections are complete.

3 

Access the unit from a browser to configure the appropriate settings.  ( 

➭

 page 15)

Set the password, image quality, connection destination, etc. Configuring the correct settings allows you to 
view recorded data on a computer or smartphone.

4 

Secure the camera to the pantilter. ( 

➭

 page 25)

Secure the camera to the pantilter.

•  Attach an optional item if necessary.

Insert/Attach an SD card  ( 

➭

 page 28), battery  ( 

➭

 page 29), external mic  ( 

➭

 page 30), and AV cord  ( 

➭

 page 31).

•  See "Establishing a wired connection" (page 27) to connect the unit with the LAN cable.

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments