manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 138 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 138

3

Chapter 2  Advanced Operations 

Viewing Video from Multiple Cameras

JVC CAM Control (for iPad) enables you to switch 
between multiple cameras when viewing video.

[Caution]
To view video from multiple cameras, fi rst you need to 
purchase the additional cameras.

1.  On the left side of the [CAMERA REGISTRATION] screen, 

select the slot in which to register the camera.

2.  In the camera list on the right side of the screen, touch 

the camera to use and log in. For details on logging in, 
refer to "4. Registering the Camera to Use" in "Chapter 1 
Quick Operation Guide".

3.  Touch the Back button in the top left of the screen to 

display the monitor display.

4.  You can now select a camera video by touching a 

camera thumbnail on the right side of the monitor 
display.

  Up to four cameras can be viewed at the same time.

1

2

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments