JVC GV-LS2 User Manual Download Page 131

Page: 131 / 172

Chapter 3 Screen Descriptions - [CAMERA RESOURCE SETTING] Screen

Use to confi gure settings such as video and audio for the
currently used camera.

1. Touch

2. Touch [CAMERA RESOURCE].

3. Select the item to set by touching it.

[STREAM SETTING] button

Use to change the stream setting for the camera.
Various restrictions apply depending on the stream
setting of the camera, so use the setting appropriate for
the time or situation.

[MPEG-2 TS(HD) + MotionJPEG]

Use to stream via the Internet in HD quality using
"Camera Driver".
Recording onto the camera cannot be performed in this
mode.

[MPEG-2 TS(SD) + MotionJPEG]

Use to stream via the Internet in standard quality using
"Camera Driver".
Recording onto the camera cannot be performed in this
mode.

[MotionJPEG]

Recording onto the camera can only be performed in
this mode.

[Caution]
The stream setting cannot be confi gured when
connected to the camera via the Internet.

Summary of Contents for GV-LS2













































































































































































Search results

Summary of Contents for GV-LS2

Reviews:

JVC GV-LS2, User Manual, Page: 131 / 172

Search results

Summary of Contents for GV-LS2

Reviews: